What is Vat Photopolymerization?
A Guide to the process and its most common forms

Vat Photopolymerization a 30+ year old method of 3D printing that is being used to create everything from prototypes to functional industrial parts. Vat Photopolymerization is used in additive manufacturing to create pieces that can have a wide variety of physical and mechanical properties.

The most common types of vat photopolymerization are Stereolithography (SLA), Digital Light Processing (DLP), and Liquid Crystal Display (LCD). Even more are being developed as software, light sources and optical clarity continue to improve. We will review the equipment and chemicals, as well as the benefits and concerns in this feature.

1. What is Vat Photopolymerization?

Vat photopolymerization, often referred to as VPP, is a 30+ year old method of 3D printing that utilizes a light source to selectively harden photoreactive resin. The 3D printing resin is held in a vat either above or below the light source. In top down printing, the build plate remains submerged below in the resin tank and sequentially lowers when each successive layer is cured. In bottom up printing, the build plate is suspended above the vat, and the light is projected through a film, or window, on the bottom.

The printed part is commonly retracted then replaced near the film so that the resin can flow under it to create another layer. The light source, either a laser or some variation of projected light, irradiates only specific areas on the vat of photopolymer. The base then adjusts to maintain a consistent volume of liquid photopolymer between the light source and the printed image/piece, and the process is repeated until the object is completed.

3D printing object - Vat Photopolymerization RAHN

Vat photopolymerization is known for its extremely good resolution and accuracy. The stated resolution on most printers is the resolution in the XY plane. When using a laser-based system, that is the width of the laser itself. When using any of the projected light methods, that is the best possible resolution of the image (similar to resolution ratings for televisions). The layer thickness is the resolution in the Z direction. This is determined by several aspects including the amount of power delivered by the light, the accuracy and control of the mechanical parts among others. Depending on the type of printer, build sizes will be determined by either the size of the vat or the capability of the light projector.

2. Most common types of Vat Photopolymerization

There are several types of Vat Photopolymerization printers. The first was SLA, which has traditionally been considered to have the best resolution. In traditional SLA, the laser traces each individual layer. The very narrow width of the laser allows for better resolution. Because the laser traces every layer, the speed is typically not quite as fast as other methods in this category. SLA 3D printing materials are crucial in achieving the high resolution and precision associated with this method.

DLP adds a speed advantage due to irradiating each layer at one time. The projector works precisely like a television projector. The mechanics are vastly similar to other Vat Photopolymerization methods regardless of whether it is top down or bottom up. The technology also allows for typically lower hardware costs, and the use of less resin. There is a slight detriment in that the build volume can be limited due to more limited light power being delivered at the edges.

LCD is very similar to DLP. The main difference is the light source itself. LCD uses a single source lamp and the LCD masks where the light is not supposed to hit the resin.

LCD can theoretically scale to larger build volumes as the light intensity stays the same across the entire vat. The issue is that light can slightly bleed around the mask which can reduce the overall resolution of the print.

As the technology has progressed, companies have developed ways to continuously print with Vat Photopolymerization. This is done in bottom-up printers and achieved by using a gas permeable film. This allows oxygen to continuously flow through, inhibiting the UV curable resin for 3D printing from curing and enabling the print to be continually pulled away without adhering to the membrane. These machines tend to be very expensive, but they have allowed a more rapid growth into manufacturing instead of simply prototyping.

A method still in development, but showing notable promise is volumetric printing. This method requires advanced print engines and optimal optics but allows for much faster printing. Thus far, print speeds have been able to be pushed down to under a minute (albeit relatively small parts).

3. VAT photopolymerization applications

Due to their ability to print objects with high accuracy and details, Vat photopolymerization methods are most often applied in the medical and dental industry. Resin requirements are somewhat method dependent, although lower viscosity tends to be better as it allows for faster flow and more uniform recoating for uniform layers. Relatively fast cure and low shrinkage upon cure are also very desirable. One notable drawback is that the vast majority of Vat Photopolymerization applications are single material which can limit the number of applications for which it can be used.

Vat Photopolymerization is a very versatile, and effective means to produce both prototypes and production pieces. As speed and build volume continue to grow, the economic arguments will only get stronger.

Find out more about how we can help you with our solutions and raw materials for 3D printing.

3D printing teeth model - Vat Photopolymerization RAHN

FAQ

Q1: What is Vat Photopolymerization?

A1: Vat Photopolymerization, is a 30+ year old 3D printing method that uses a light source to selectively harden photoreactive resin. The resin is contained in a vat either above or below the light source, and there are two primary methods: top-down and bottom-up printing. The light source, whether a laser or projected light, irradiates specific areas on the resin, creating successive layers to build an object with exceptional resolution and accuracy.

Q2: What are the most common types of Vat Photopolymerization?

A2: The most common types include: Stereolithography (SLA): Known for exceptional resolution, SLA employs a laser to trace each layer individually.

Digital Light Processing (DLP): This method irradiates each layer all at once using a projector, resulting in faster print times.

Liquid Crystal Display (LCD): Similar to DLP but uses an LCD mask to control light exposure, potentially allowing for larger build volumes.

Q3: How has Vat Photopolymerization technology evolved?

A3: Continuous printing is possible in bottom-up printers with gas-permeable films. This innovation enables the continuous pull of prints, expanding applications beyond prototyping to manufacturing. Another promising development is volumetric printing, which offers faster print speeds and smaller parts produced in under a minute.

Q4: Where are Vat Photopolymerization methods most commonly applied?

A4: Vat Photopolymerization is extensively used in the medical and dental industry due to its ability to print objects with high accuracy and detail. However, it's essential to consider resin requirements, which vary based on the specific method employed. Lower viscosity resins are generally preferred for faster flow and more uniform recoating. Fast curing and low shrinkage are also desirable qualities. Note that the majority of Vat Photopolymerization applications use a single material, which can limit their versatility.

Q5: How versatile is Vat Photopolymerization for various applications?

A5: Vat Photopolymerization is highly versatile and effective for producing prototypes and production components. As technology continues to advance, with increased speed and larger build volumes, the economic viability of Vat Photopolymerization applications continues to grow.